With the advantages of low-carbon environmental protection, light weight, flexibility, and high cost performance, electric motorcycles quickly become an indispensable means of travel for citizens. However,it is not cheap. For it is relatively light and can be completely removed even if it is turned off, so there is a problem that is the high theft rate of electric motorcycles.
Significance of HengJi KeDa Electronic Motorcycle GPS Tracker Project
To realize the intelligent management of electric bicycles, reduce the theft of electric bicycles, and enhance residents’ satisfaction and sense of security.
To launch of smart electric motorcycles and smart electric bikes to make products more competitive.
To prevent the electric motorcycles from being stolen.
Features of HengJi KeDa Electronic Motorcycle GPS Tracker
1. Beidou, GPS and LBS multiple positioning model
Built-in MTK2503 high-sensitivity chipset, use MTK determination technology, MTK2503 integrates GPS and GSM in one chip, high price, new technology, quick positioning, low power consumption.
2. 9-100V wide voltage design
Suitable for various of vehicles, automatic identification of electric bikes and electric motorcycle voltage without settings.
3. Low voltage protection
You can set the terminal remotely to prevent ignition failure caused by motorcycle battery loss. When the voltage of the built-in backup battery of the terminal is lower than the set threshold, a low battery alarm message is generated. When the vehicle battery is detected to be low, it will automatically cut off the battery power supply and use the internal battery power supply of the terminal to prevent the vehicle battery from losing power.
4. Remote power cutoff
The terminal intelligently executes the safe power cut off and flameout commands according to the vehicle speed, and can remotely cut off the oil and power.
5. Power off alarm
When the terminal’s main power is disconnected, a power off alarm message is generated. And send the alarm information to the platform.
6.Vibration alarm.
In the fortified state, when the vibration induced by the terminal exceeds the vibration sensitivity level, a vibration alarm message is generated. And send the alarm information to the platform.
7.Backup battery
Built-in industrial-grade polymer battery. When the external power of the terminal is disconnected, the built-in battery is automatically switched, which can work normally for 2 ~ 3 hours.
8.Geo-fence
Set a safe area through the platform or APP. When the vehicle exceeds the safe area, an out-of-bounds alarm message is generated and sent to the platform.
9.Backup battery undervoltage alarm
When the voltage value of the built-in backup battery of the terminal is lower than the set threshold. Generate low voltage alarm information is generated and send it to the platform.
10.Blind area supplementary transmission
GPS data can be stored in the blind area of the GSM signal. When the GSM signal is restored, the additional data is transmitted to platform.
11.Remote setting
It support that send instructions to the terminal through platform or APP.
12.Remote upgrade
Remote upgrade of terminal software via GPRS network
Learn more about electric motorcycles GPS Tracker at www.hengjikeda.com
